http://www.RogueSystems.co.uk/images/roguesystemslogo.gifhttp://www.RogueSystems.co.uk/The rubber bush of the tension rod has been replaced with pillow balls (spherical bearing) in all TEIN's Pillow Ball Tension Rod to eliminate tow change through compliance on acceleration or deceleration and allow only for vertical movement by the lower - arms. It also reduces the roll at corners and creates quicker steering response. In addition, the wheel alignment (caster angle) can be set through adjustments. - Price: £350.00 (£420.00 inc. VAT)http://www.RogueSystems.co.uk/forms/Product.aspx?ID=489The rubber bush of the tension rod has been replaced with pillow balls (spherical bearing) in all TEIN's Pillow Ball Tension Rod to eliminate tow change through compliance on acceleration or deceleration and allow only for vertical movement by the lower - arms. It also reduces the roll at corners and creates quicker steering response. In addition, the wheel alignment (caster angle) can be set through adjustments. - Price: £280.00 (£336.00 inc. VAT)http://www.RogueSystems.co.uk/forms/Product.aspx?ID=490TEIN's pillow ball (spherical bearing) upper mount is designed for each individual model of the vehicle. By retaining the positioning design of upper spring and shock absorber close to manufacture's standards, TEIN's pillow ball upper mount keeps height change to the minimum and maintains the stroke center.

Mk2 Front : £160.00 per pair

MK2 Rear : £150.00 per pair

- Price: £150.00 (£180.00 inc. VAT)http://www.RogueSystems.co.uk/forms/Product.aspx?ID=491Newly designed and developed for those core drivers seeking the ultimate in street and track performance.

• Mono-tube internal damper design

• Full-length ride height adjustment system

• 16-level damping force adjustment feature(combined comp./rebound adjustment)

• Newly developed M.S.V. (Micro Speed Valve)

• EDFC compatible for easy in-car damping force adjustment!!

- Price: £1,570.00 (£1,884.00 inc. VAT)http://www.RogueSystems.co.uk/forms/Product.aspx?ID=492Pressed steel cover, Single plate with sprung hub. (225mm disk. Release B/G set enclosed).

Comes complete with OSG flywheel. - Price: £560.00 (£672.00 inc. VAT)http://www.RogueSystems.co.uk/forms/Product.aspx?ID=493Pressed steel cover, Twin plate clutch, Pressure of cover 9800N-m (1000Kgf/m).

Comes complete with OSG Special release bearing and flywheel. - Price: £855.00 (£1,026.00 inc. VAT)http://www.RogueSystems.co.uk/forms/Product.aspx?ID=494This is a replacement braided brake line kit for the SW20 MR2. The kit comes ready assembled with chasis mounting brackets included.

The brake lines are available the following colours,

- Sexy Blue
- Clear/Silver
- Black
- Carbon

All brake lines are weather proof coated. - Price: £79.99 (£95.99 inc. VAT)http://www.RogueSystems.co.uk/forms/Product.aspx?ID=495These Magnecor KV85 Ignition Leads are a great upgrade for the engine. The 8.5mm silicone lead gives better insulation which holds a better spark.

Only available with rubber boot conectors on the distributor end. - Price: £78.25 (£93.90 inc. VAT)http://www.RogueSystems.co.uk/forms/Product.aspx?ID=496For Street and Circuit Use

Specifications
Front Coilovers : Pillowball Top Mount.
Front Spring Rate : 5kg/mm (279.3lbs/in)
Rear Coilovers : Rubber Top Mount or No Top Mount.
Rear Spring Rate : 8kg/mm (446.9lbs/in)

Information
The BR series coilovers use a large 44mm diameter piston in a 53mm diameter damper body to maximise oil capacity. As the damper unit operates the oil contained within heats up. The viscosity of oil changes as its temperature varies which can lead to changes in the damping characteristics of the unit.

BC Racing only use a very high quality oil with their coilovers but go that extra mile to maximise performance and build their BR range with a large 53mm diameter damper body. This increases the capacity of the unit which increases the volume of oil contained which in turn reduces the peak temperature and so significantly improves damper performance.

Available for all mks and revision of MR2! Popular kits are held in stock, others are available within around 7 working days. - Price: £564.35 (£677.22 inc. VAT)http://www.RogueSystems.co.uk/forms/Product.aspx?ID=497For Fast Road and Pro Circuit Use

Specifications
Front Coilovers : Inverted Shock - Camber Pillowball Top Mount.
Front Spring Rate : 5kg/mm (279.3lbs/in)
Rear Coilovers : Inverted Damper -Inc Pillowball Top Mount.
Rear Spring Rate : 8kg/mm (446.9lbs/in)

Information
The BC Racing RM series feature high quality damping adjustable monotube inverted dampers at the front or front and rear, depending on vehicle. The RM coilovers offer the majority of the features of the BR series but with the additional benefit of the inverted damper unit. Inverting the damper unit brings with it a number of advantages.

- Price: £738.26 (£885.91 inc. VAT)http://www.RogueSystems.co.uk/forms/Product.aspx?ID=498